|
|
Add-on instructions of the AS-Interface for the conveyor
Püschel, Robert ; Foukal, Roman (referee) ; Štohl, Radek (advisor)
The aim of the bachelor‘s thesis is to acquaint readers with a creation of Add-On Instructions in the development environment Studio 5000 for the industrial network AS-Interface, to which the conveyor model is connected. The thesis is divided into a theoretical part dealing with the description of the AS-Interface network, the operation of the Add-On instruction and the conveyor model and a practical part that describes the specific creation of Add-On instructions, their logic, demonstration in a task and a complete list.
|
|
| |
|
|
Horizontal driven roller conveyor
Sláma, Jakub ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deals with design-driven horizontal roller tracks for the transport of steel castings in the interoperation internal transport, was made functional calculation of the roller track and determined the main dimensions of lines, the work deals with designing the drive, strength calculation poháněcího chain and check the frame lines. Subsequently, the preparation of its finished drawing lines, assembly lines and drawing section drawing of the drive subassembly lines.
|
|
| |
|
|
Innovation of the bucket elevator
Hála, Ondřej ; Frýza, Josef (referee) ; Brandejs, Jan (advisor)
The bachelor thesis deals with the innovation of the bucket elevator. The thesis is focused on design modification of the elevator in the areas where the transported material is settled. Settled material causes decay and subsequent contamination of the fresh material. Main purpose of this paper is to propose design solution to improve cleaning of the feed boot of the bucket elevator. The next innovation deals with the modification of the marking system and efficient series of the elevators.
|
|
|
Conveyor Inverter - Design Lifting Mechanism
Zálešák, Martin ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
I am concern with a proposal of conceptual solution of Conveyor Inverter in my bachelor work. This Conveyor Inverter is used for the change of the direction europallet about 90° between roller and chain conveyor according to given technical parameters. My bachelor work contains complete 3D proposal, constructional and functional solutions which are based on checking calculations. Lifting of the Conveyor Inverter is done using a leverage mechanism of electric motor.
|
|
|
Temperature Profile in Reflow Soldering and Influence of Different PCBś and ComponentsThermal Capacities
Procházka, Martin ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
This thesis mainly deals with the prediction of temperature on the components and the PCB during reflow soldering. The theoretical part describes the particular solder reflow process, types of heat transfer and temperature profiles. The practical part is divided into forecasting temperatures if the conveyor is stopped and the temperature predictions when the conveyor is in motion. In both parts of the measured temperature is compared with the predicted temperatures, which show the success rate of prediction. The last part of this work is part of the simulation, which helps in proper understanding of the issues discussed.
|
|
|
Bucket elevators
Cajzl, Štěpán ; Jonák, Martin (referee) ; Malášek, Jiří (advisor)
The aim of this research thesis is to provide an overview of manufacturers that are using buckets for transportation or acquisition of material and the equipment of these manufactures. It is the bucket conveyors, bucket wheel excavators and bucket chain excavators. The next part of this thesis focuses on the theoretical approach towards the calculation when the shape of the surface of the particular material forms a logarithmic spiral. Within the technical part of the calculation this thesis focuses on forms of calculation of individual parts of the elevator. The last part is an overview of transportation materials and their characteristics.
|
|
| |
|
|
Chain conveyor for moving pallets
Doležel, Tomáš ; Zeizinger, Lukáš (referee) ; Kašpárek, Jaroslav (advisor)
This work deals with the design of a chain conveyor. It is divided into four parts. The first of which deals with the search for similar conveyors and handling units. The second design of the conveyor component. The third calculation of functional dimensions and forces. And the fourth is the strength calculations of selected structural units of the chain conveyor. The output of the bachelor thesis are drawings.
|
guest ::
